Advanced Chart Features > Chart Limits

Chart Limits refer to the start point and the end point of the Y axis scale.

Properties of the chart limits can be configured from the 'ChartLimits' panel which is located in the 'Chart Selection' screen. Note, that the 'ChartLimits' panel will not be displayed unless the 'Show advanced options' check box has been selected.

Following configurable parameters are available in the 'ChartLimits' panel:

• showLimits: This parameter allows you to display or hide the limits of the Y axis scale.
• showSecondaryLimits: Using this parameter you can display or hide the limits of the secondary Y axis.
• setAdaptiveYmin: If the 'setAdaptiveYmin' parameter is enabled - the start point of the Y axis scale will be automatically determined based on the values of the data.



Automatically determined minimum value for the Y axis

• setAdaptiveSYMIn: Using this parameter you can turn on or turn off the adaptive Y min for the secondary Y axis.
• yAxisMinValue: In the 'yAxisMinValue' field you can specify the minimum value of the Y axis scale. You may use this parameter if you are not satisfied with adaptive Y min.


• yAxisMaxValue: In the 'yAxisMaxValue' field you can specify the maximum limit for the Y axis scale.
• sYAxisMinValue: In the 'sYAxisMinValue' field you can specify the minimum value for the secondary Y axis scale.
• sYAxisMaxValue: In the 'sYAxisMaxValue' field you can specfify the maximum value for the secondary Y axis scale.