In the table below you can see the effects available for the IN and OUT transitions of the image items in the show; each effect occupies a row of the table. In the first column you can find a preview of the effect and you can run it by clicking on the Creative DW Image Show PRO icon; the effect will run continously, starting with its IN appearance, than a little delay and finishing with its OUT appearance - 3 seconds of running time. In the second column the effects' interfaces are presented, while in the third one all the configurable parameters are described.
Effect |
Configuration Interface |
Description |
|---|---|---|
Click on the icon to run the animation |
Accordion
Accordion effect configuration interface |
- Horizontal Blur: the strength of the blur applied horizontally. - Vertical Blur: the strength of the blur applied vertically. - Start Alpha: the opacity of the initial state of the image, before the effect starts (low value – transparent image, high value – opaque image); the effect will pass progressively from this state to its normal state. - Angle: the angle at which the strips will be arranged, with respect to a vertical axis. - Gap Increase: the initial distance between stripes, distance which decreases with the running of the effect. - Bar Width: the width of the bars (the initial one will have this value because the next ones will be affected by the motion, gap increase and so forth). - Bar Number: the number of bars creating the effect. |
Click on the icon to run the animation |
Blur
Blur effect configuration interface |
- Fade: the opacity of the initial state of the image, before the effect starts (low value – transparent image, high value – opaque image); the effect will pass progressively from this state to the normal state. - Horizontal Blur: the strength of the blur applied horizontally. - Vertical Blur: the strength of the blur applied vertically. |
Click on the icon to run the animation |
Circle MaskWave
Circle Mask Wave effect configuration interface |
- Ordering Type: the path the pieces will follow when running the effect; there are thirteen options available – Simple, Snake (with eight variations connected to the starting place and the motion sense – clockwise or counter-clockwise) and Spiral (with four variations given by the motion sense – in and out, clockwise and counter-clockwise). - Piece Duration: the duration an element of the effect will take to run. - Vertical Cuts: the number of vertical pieces. - Horizontal Cuts: the number of horizontal pieces. |
Click on the icon to run the animation |
Dark Tint
No editable parameters |
No editable parameters. |
Click on the icon to run the animation |
Decomposer
Decomposer effect configuration interface |
- Ordering Type: the path the pieces will follow when running the effect; there are thirteen options available – Simple, Snake (with eight variations connected to the starting place and the motion sense – clockwise or counter-clockwise) and Spiral (with four variations given by the motion sense – in and out, clockwise and counter-clockwise). - Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. The enabled Random option disables the ordering type parameter. - Piece Duration: the duration an element of the effect will take to run. - Vertical Cuts: the number of vertical pieces. - Horizontal Cuts: the number of horizontal pieces. |
Click on the icon to run the animation |
Fade
No editable parameters |
No editable parameters. |
Click on the icon to run the animation |
Imprint
Imprint effect configuration interface |
- Fade: the opacity of the initial state of the image, before the effect starts (low value – transparent image, high value – opaque image). - Horizontal Blur: the strength of the blur applied horizontally. - Vertical Blur: the strength of the blur applied vertically. |
Click on the icon to run the animation |
Piece Prestige
Piece Prestige effect configuration interface |
- Ordering Type: the path the pieces will follow when running the effect; there are thirteen options available – Simple, Snake (with eight variations connected to the starting place and the motion sense – clockwise or counter-clockwise) and Spiral (with four variations given by the motion sense – in and out, clockwise and counter-clockwise). - Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. The enabled Random option disables the ordering type parameter. - Piece Duration: the duration an element of the effect will take to run. - Vertical Cuts: the number of vertical pieces. - Horizontal Cuts: the number of horizontal pieces. |
Click on the icon to run the animation |
ScaleWave
Scale Wave effect configuration interface |
- Number Of Stripes: the number of stripes from which the image will be reconstructed. - Scale Offset: the height from which the strips will fall on the screen. - Piece Duration: the duration an element of the effect will take to run. - Play Direction: the direction from where the effect will start; if we choose Right or Left, the effect will start from the top-right/top-left corner, while if we choose Top or Bottom, it will start from the left - top or bottom. |
Click on the icon to run the animation |
Simple Light
No editable parameters |
No editable parameters. |
Click on the icon to run the animation |
Stripes 3D
Stripes 3D effect configuration interface |
- Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. - Direction: the direction from where the stripes will come; there are three options available – Up, Down and Left. - Angle: the number of degrees the stripes will rotate around a point until the image will be created. - Offset: the horizontal distance between the top-left corner and the place where the effect will start. - Piece Duration: the duration an element of the effect will take to run. - Number of Stripes: the number of stripes from which the image will be reconstructed. |
Click on the icon to run the animation |
Stripes Alternative
Stripes Alternative effect configuration interface |
- Angle: the angle at which the strips will be arranged, with respect to a horizontal axis. - Number of Stripes: the number of stripes from which the image will be reconstructed. - Piece Duration: the duration an element of the effect will take to run. - Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. |
Click on the icon to run the animation |
Stripes Blinds
Stripes Blinds effect configuration interface |
- Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. - Fade: the opacity of the initial state of the image, before the effect starts (low value – transparent image, high value – opaque image). - Angle: the angle at which the strips will be arranged, with respect to a vertical axis. - Scale Offset: the height from which the strips will fall on the screen; if we introduce a negative number, the effect will have the appearance of ascending from below. - Piece Duration: the duration an element of the effect will take to run. - Number of Stripes: the number of stripes from which the image will be reconstructed. |
Click on the icon to run the animation |
Stripes Centered
Stripes Centered effect configuration interface |
- Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. - Angle: the angle at which the strips will be arranged, with respect to a vertical axis. - Piece Duration: the duration an element of the effect will take to run. - Number of Stripes: the number of stripes from which the image will be reconstructed. |
Click on the icon to run the animation |
Stripes Mask
Stripes Mask effect configuration interface |
- Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. - Angle: the angle at which the strips will be arranged, with respect to a vertical axis. - Piece Duration: the duration an element of the effect will take to run. - Number of Stripes: the number of stripes from which the image will be reconstructed. |
Click on the icon to run the animation |
Stripes Translation
Stripes Translation effect configuration interface |
- Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. - Angle: the angle at which the strips will be arranged, with respect to a horizontal axis. - Offset Left: a distance to the left, with respect to the top left corner of the image; from here the effect will start. - Offset Top: a distance upwards, with respect to the top left corner of the image; from here the effect will start. - Piece Duration: the duration an element of the effect will take to run. - Number of Stripes: the number of stripes from which the image will be reconstructed. |
Click on the icon to run the animation |
StripesWave
Stripes Wave effect configuration interface |
- Angle: the angle at which the strips will be arranged, with respect to a vertical axis. - Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. - Fade: the opacity of the initial state of the image, before the effect starts (low value – transparent image, high value – opaque image). - Number Of Stripes: the number of stripes from which the image will be reconstructed. - Scale Offset: the height from which the strips will fall on the screen. - X Position: the starting position on the horizontal axis of the screen, where (0;0) is the top-left corner. - Y Position: the starting position on the vertical axis of the screen, where (0;0) is the top-left corner. |
Click on the icon to run the animation |
StripesWave Double
Stripes Wave Double effect configuration interface |
- Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. - Angle: the angle at which the strips will be arranged, with respect to a vertical axis. - Piece Duration: the duration an element of the effect will take to run. - Number of stripes: the number of stripes from which the image will be reconstructed. |
Click on the icon to run the animation |
Transparency Circular
Transparency Circular effect configuration interface |
- Fade: the opacity of the initial state of the image, before the effect starts (low value – transparent image, high value – opaque image). - Horizontal Blur: the strength of the blur applied horizontally. - Vertical Blur: the strength of the blur applied vertically. |
Click on the icon to run the animation |
Transparency Middle Resize
Transparency Middle Resize effect configuration interface |
- Angle: the angle at which the effect will be applied, with respect to a horizontal axis. - Fade: the opacity of the initial state of the image, before the effect starts (low value – transparent image, high value – opaque image). - Horizontal Blur: the strength of the blur applied horizontally. - Vertical Blur: the strength of the blur applied vertically. - Inside: refers to the sense of the effect; if disabled, it will start from the center of the image going to the sides, and vice-versa. |
Click on the icon to run the animation |
Transparency Resize
Transparency Resize effect configuration interface |
- Angle: the angle at which the effect will be applied, with respect to a horizontal axis. - Fade: the opacity of the initial state of the image, before the effect starts (low value – transparent image, high value – opaque image). - Horizontal Blur: the strength of the blur applied horizontally. - Vertical Blur: the strength of the blur applied vertically. |
Click on the icon to run the animation |
Wipe
Wipe effect configuration interface |
- Random Order: if disabled, the effect will have the same appearance every time; otherwise, a random behavior will be added, thus creating a different appearance every time. - Stripes Behavior: refers to how the stripes will appear on the screen; there are four options available – Forward, Backward, Alternative and Middle. - Angle: the angle at which the strips will be arranged, with respect to a vertical axis. - Piece Duration: the duration an element of the effect will take to run. - Number of Stripes: the number of stripes from which the image will be reconstructed. |
